城轨列车故障救援与停车线设计

通过对广州地铁的列车故障救援分析,总结城轨列车故障救援的组织原则,从列车故障救援组织的角度,提出停车线的设计应考虑列车故障救援,并对停车线设计的原则和《地铁设计规范》的完善进行探讨。     

2017年中国城市轨道交通运营线路统计与分析

截至2017年底,中国内地共有33座城市拥有城市轨道交通运营线路,总长4 706 km,运营线路161条,其中新增运营线路32条(段),新增运营里程874 km.统计运营线路的名称、里程等情况,并对统计口径和特别情况予以说明(本文中的统计数字没有包含由国家铁路部门管理的324 km市域快轨线路).给出2017年中国各城市的轨道交通运营线路数量和里程排序.并对我国轨道交通总体发展情况做了简要分析.北京以22条线位居运营线路数量首位,上海以676 km位居运营总里程首位.预测到2018年底,运营总里程将接近6 000 km,运营城市数量达到36座.     

关于分段绝缘器运行问题的探讨

对分段绝缘器在运行过程中出现的问题和故障进行了详细的调查,从多方面分析了滑道烧损、绝缘失效、弓网剐碰产生的原因;对受电弓和分段绝缘器的结构、材料以及导流转换方式等进行了研究,并对分段绝缘器的工作条件、安装位置、检修要点、弓网匹配等方面提出了看法和改进建议。     

500kV超高压线路低空跨越条件下公路大桥桥梁架设的安全技术

通过对在500 kV超高压电线低空跨越条件下公路大桥架梁施工安全技术与组织管理措施的研究并实施,以采用架桥机架梁方案为基础,对500 kV超高压电线低空跨越下的架梁工况条件、高压感应电场的强度和电流进行计算与分析,对作业人员和设备的伤害状况作出了分析,并提出了保证作业人员、设备和电力设施安全的防护技术与组织管理措施。     

城市轨道交通郊区线车站消防给水设计

随着城市扩张和卫星城的发展,郊区线逐渐成为轨道交通工程建设的一个重要方向。针对郊区线远离城区车站的特点,研究其给水设计尤其是消防给水设计的指导思路和方案。提出根据近、远期的车站周边水源条件,统筹、优化水源方案的设计思路;为保证偏远车站自救需要,强调设置消防水池、消防车取水口、室外消火栓管网及加压设施的必要性。     

遗传算法在区段站到发线的应用研究

为解决车站到发线的合理运用问题，采用遗传算建立了到发线运用的染色体结构和适应度函数，对这种复杂的非线性组合优化问题进行了仿真。     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.     

Estimation of extreme significant wave heights and the associated uncertainties: A case study using NORA10 hindcast data for the Barents Sea

The reliability of an offshore structure is dependent on its response to the extreme wave climate; therefore, an adequate knowledge of the wave climate at a location is a prerequisite during design as well as in marine operations. This study aims to contribute to the knowledge of the extreme wave climate in the Norwegian Sector of the Barents Sea, using wave hindcast datasets from the Norwegian Reanalysis 10 km (NORA10) database for four locations.We have considered three commonly used methods for the estimation of extreme wave heights, that is, the initial distribution method, the peak over threshold method, and the annual maxima method. The parametric bootstrap concept is considered in the estimation of the epistemic uncertainty related to sample size. The estimated 100-year significant wave heights obtained from the three methods differ, and the degree of variability in the estimates varies, depending on the dataset. The epistemic uncertainty due to sample size is wider when considering the annual maxima method.The estimates obtained from the three methods show the importance of considering different methods and their associated uncertainties when estimating extreme wave values for design. While it is difficult to single out the best method among the three, the estimated values give knowledge of the possible range of the extreme significant wave heights at the locations. Generally, the datasets considered in this study suggest that the wave climate is less harsh further north compared to the southern region of the Barents Sea. The datasets do not suggest any temporal trends in the historical significant wave heights at any of the locations.     

乾元公司铁路专用线场站模式探讨

目前,传统的铁路专用线建设模式是铁路专用线自接轨站接轨,通过区间正线引入厂区的建设模式,这种模式的区间正线受地形条件、厂区位置和沿线规划影响较大,这些影响将不可避免地导致铁路专用线建设工程投资的增加,如能根据运输性质考虑缩短区间正线长度,在接轨站旁边设装车作业站,将大大减少专用线工程投资.以乾元公司铁路专用线建设模式为例来研究铁路专用线场站模式,就如何在接轨站旁边设装车作业站,实现接轨站设备与铁路专用线共用进行探讨.     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.